Welcome to Speed Hobbies


Be the first to review this product

Availability: In stock


Quick Overview

Idea-Fly Apollo A2 Quadcopter Ready-to-Fly w/2.4GHz Radio, GPS System & Remote Camera Gimbal

Full View
Full View
Full View
Full View
Full View
Full View
Full View
Full View
Full View
Full View


This is an Idea-Fly Apollo A2 Quadcopter. The Apollo A2 is a ready-to-fly quad-rotor heli designed for quadcopter enthusiasts and amateur photography/video hobbyists alike. The integrated flight-control system includes GPS that provides precise Position-Hold, Fail-Safe, Semi-Autopilot and Return-to-Home functions. Equipped with high-performance brushless motors, ESCs and carbon fiber propellers, the Apollo A2 is a top-of-the-line, fully-featured advanced quadcopter. Advanced performance has never been so easy!



• Easy to Operate and Fun to Fly

• Durable Factory-Assembled Frame

• 2.4GHz Digital Transmitter and Receiver

• Precise Hovering and Self-Leveling with GPS

• Return to Home GPS Function

• 2-Axis Camera Gimbal w/Remote Pitch Control

• Low Noise, High Performance Brushless Motors

• Fail-Safe and Low-Voltage Protection

• Bright LEDs Ensure Good Visibility

• Custom Programming and Updateable Firmware

• Replacement Parts and Option Parts Available


• Length: 12.25 Inches

• Width: 11 Inches

• Flying Weight: Approximately 2.6 Pounds

• Propeller Size and Type: 8 x 4 Carbon Fiber

• Flying Time: Approximately 8 Minutes

• Operating Temp: 14°F to 122ºF (-10ºC to 50ºC)

• Power Consumption: 3.12W

• GPS Hovering Precision: +/- 0.8M Vertical, +/- 2.5M Horizontal

• Maximum Yaw Angular Velocity: 300deg/sec

• Maximum Tilt Angle: 45 Degrees

• Maximum Ascent/Descent Speed: +/- 4ms

What's Included:

• Fatory-Assembled Apollo A1 GEN2 Quadcopter

• MC6 2.4GHz Digital Transmitter

• 3S 11.1V 2200mAh 30C LiPo Battery

• AC LiPo Charger w/Power Cord

• Camera Gimbal w/Digital Servos

• Foam Landing Pads

• Assorted Mounting Screws

• Jumper Wire Plug

• CD w/Operator’s Manual PDF, Software and How-To Videos

• Quick-Start Guide

Items Required, But Not Included:

• 8 ‘AA’ Alkaline Batteries for Transmitter

• Mini USB Cable and Windows PC or Laptop for Programming and Firmware Updates**

• LiPo Battery Low Voltage Alarm*

*When the LiPo battery voltage drops to the low voltage cutoff value during flight, the LED Condition Indicator will flash Red rapidly to indicate you must land immediately. For extra precaution, we suggest using a programmable LiPo Battery Voltage Alarm that can be mounted with the LiPo battery inside the quadcopter. You are able to program the alarm to sound at a higher cutoff voltage value to give you more time to safely land before the battery voltage drops too low and results in a crash.

**Not required for basic flying, but programming is required for best performance.

Additional Information


Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.